Front protection photoelectric barriers
Fixed screwed back protection
Fixed right side protection screwed
Fixed screwed left side protection
Lower floor - machining / slots for T nuts on customer request
Movable table - machining / slots for T nuts at the customer's request
Installed power 15 KW
Thrust force of main cylinder 30 Tons
Operator side horizontal light 810 mm
Side horizontal light 810 mm
Vertical light 1000 mm
Main cylinder stroke 700 mm
Height of the worktop from the ground 900 mm
Lower worktop size 800x1000 mm
Mobile worktop size 800x1000 mm
Fast descent speed 200 mm / sec
Working speed 10 mm / sec
Fast ascent speed 200 mm / sec

- FOUR COLUMN PRESS
- POWER 1000 ton.
- SPAN 2200x2200x1500 mm.
- STROKE 1000 mm.
- SPEED 200/10/200 mm/sec.
- ELECTRONIC WORKING SPEED REGULATION
- COMPLETE WITH 200TON UPPER BLANK HOLDER STROKE 250 mm.
- COMPLETE WITH 400 ton. LOWER BLANK HOLDER STROKE 500 mm. WITH FOUR 100 ton. LATERAL SHOCK ABSORBERS STROKE 300 mm.
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES
- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES WITH BIMANUAL PUSH-BUTTON CONTROL PANEL.

- POWER 1500 ton.
- SPAN 2500x600x2600 mm.
- COLUMN DIAM. 400 mm.
- STROKE 1800 mm.
- SPEED DOWN / UP 100 mm/sec.
- SPEED WORK 15 mm/sec.
- POWER INSTALLATION 200 kW
- COMPLETE WITH 250 ton. LOWER BLANK HOLDER STROKE 2300 mm.
- COMPLETE WITH EXTERNALLY SLIDING BOLSTER TO CHANGE MOULDS TO 830X1350X110 mm.
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES LEVEL IVPROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES WITH BIMANUAL PUSH-BUTTON CONTROL PANEL.

- “4 COLUMN” PRESS
- PRESS EQUIPPED WITH TWO PISTONS WITH 120 ton. OVERALL POWER
- SPAN 2000x1800x1200 mm.
- STROKE 1000 mm.
- SPEED 200/5-10/200 mm/sec.
- ELECTRONIC WORKING SPEED REGULATION
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIESv- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES WITH BIMANUAL PUSH-BUTTON CONTROL PANEL PLASTIC MOULDING PRESS.

- “PILLAR” PRESS
- POWER 200 ton
- SPAN 1500X700x700 mm.
- STROKE 500 mm.
- SPEED 60/5/60 mm/sec.
- COMPLETE WITH 100 ton BLANK HOLDER STROKE 300 mm. WITH 52 HOLES FOR 40 DIAMETER ELECTRODES
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES
- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND AT THE BACK SIDE WITH BIMANUAL PUSH-BUTTON CONTROL PANEL.

- “PILLAR” PRESS
- POWER 90 ton
- SPAN 900x600x900 mm.
- STROKE 550 mm.
- SPEED 350/60-40-30-20/350 mm/sec.
- ELECTRONIC WORKING SPEED REGULATION
- COMPLETE WITH 45 ton BLANK HOLDER STROKE 250 mm. WITH 16 HOLES FOR 30 mm. DIAMETER ELECTRODES WITH 3 MANUALLY ADJUSTABLE PRESSURE STAGES
- COMPLETE 30 ton WITH EXTRACTOR STROKE 100 mm.
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES
- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES WITH BIMANUAL PUSH-BUTTON CONTROL PANEL.

- “PILLAR” PRESS
- POWER 60 ton
- SPAN 600x500x650 mm.
- STROKE 550 mm.
- SPEED 350/20/350 mm/sec.
- ELECTRONIC WORKING SPEED REGULATION
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES
- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES WITH BIMANUAL PUSH-BUTTON CONTROL PANEL.

- “4 COLUMN” PRESS
- POWER 100 ton
- SPAN 800x600x800 mm.
- STROKE 600 mm.
- SPEED 200/10/200 mm/sec
- ELECTRONIC WORKING SPEED REGULATION
- COMPLETE WITH 50 ton BOTTOM BLANK HOLDER STROKE 300 mm. WITH 20 HOLES FOR 40 mm. DIAMETER ELECTRODES
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES
- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES WITH BIMANUAL PUSH-BUTTON CONTROL PANEL.