300 ton press for automotive.
Front protection of anti-intrusion optical barriers
Rear protection of anti-intrusion optical barriers
Right side protection closed structure
Left side protection closed structure
Lower floor - machining / slots for T nuts on customer request
Movable table - machining / slots for T nuts at the customer's request
Thrust force of main cylinder 300 Tons
Operator side horizontal light 3000 mm
Vertical light 1400 mm
Main cylinder stroke 1200 mm
Height of the worktop from the ground 900 mm
Lower worktop size 3000x1500 mm
Dimension of the mobile worktop 3000x1500 mm
Rapid descent speed 300 mm / sec
Working speed 5-20 mm / sec
Rapid ascent speed 300 mm / sec
FORMING PRESSES.
- “4 COLUMN” PRESS
- POWER 2000 ton. SPAN 2000x2000x1800 mm. CYLINDER STROKE 1100 mm.
- SPEED 200/50/10-5/200 mm/sec.
- ELECTRONIC WORKING SPEED REGULATION COMPLETE WITH EIGHT 20 ton. UPPER AND LOWER EXTRACTORS
- STROKE 100 mm.
-SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES, WITH BIMANUAL PUSH-BUTTON CONTROL PANEL
- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND ON THE OPERATOR’S BACK SIDE AND WITH FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES - PRESS WITH UPPER BLANK HOLDER CUSHION.
PRESSES FOR BENDING PLATE.
- “4 COLUMN” PRESS - POWER 100 ton
- SPAN 2500x1350x2000 mm.
- STROKE 1250 mm.
- SPEED 400/15/400 mm/sec.
- ELECTRONIC WORKING SPEED REGULATION
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES WITH BIMANUAL PUSH-BUTTON CONTROL PANEL
- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND ON THE OPERATOR’S BACK SIDE AND WITH FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES.
SMC SHEET MOULDING COMPOUND PRESSES.
- “C-FRAME” PRESS
- POWER 100 ton
- SPAN BETWEEN PISTON CENTRE AND PLATE LINE 1150 mm. (GROOVE)
- OPERATOR’S SIDE SPAN 1000 mm.
- SPAN BETWEEN OPEN SURFACES 500 mm.
- STROKE 500 mm.
- SPEED 28/3/28 mm/sec.
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES AND WITH BIMANUAL PUSH-BUTTON CONTROL PANEL.
SPECIAL RUBBER PRESSES.
- “4 COLUMN” PRESS
- POWER 20 ton
- SPAN 1200x1000x1000 mm.
- STROKE 800 mm.
- SPEED 300/10/300 mm/sec.
- ELECTRONIC WORKING SPEED REGULATION COMPLETE WITH 10 ton POWER EXTRACTING PISTON STROKE 150 mm.
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES
- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES WITH BIMANUAL PUSH-BUTTON CONTROL PANEL
- OLEO-DYNAMIC AND ELECTRIC SYSTEM COMPLETE WITH 3 EXTRA OUTPUTS FOR ITS MANUFACTURING EQUIPMENT
- COMPUTERIZED PRESSES.
TRANSFER PRESS.
- “4 COLUMN” PRESS
- TRANSFER PRESSv- POWER 30 ton
- SPAN 1300x1100x1300 mm.
- STROKE 800 mm.
- SPEED 300/10/300 mm/sec.
- ELECTRONIC WORKING SPEED REGULATION COMPLETE WITH 10 ton POWER EXTRACTING PISTON STROKE 150 mm.
- SELF-LEARNING EQUIPMENT WITH DATA STORAGE AND OTHER ACCESSORIES LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES WITH BIMANUAL PUSH-BUTTON CONTROL PANEL
- OLEO-DYNAMIC AND ELECTRIC SYSTEM COMPLETE WITH 5 EXTRA OUTPUTS FOR ITS MANUFACTURING EQUIPMENT
- PRESS COMPLETE WITH CENTRAL HOLE FOR UNLOADING THE 300X300 mm. PIECES-IN-PROCESS.
MOULDING PRESSES.
- “2 COLUMN” PRESS
- POWER 50 ton
- SPAN 680x500x400 mm.
- STROKE 300 mm.
- SPEED 28/3/28 mm/sec.
- EQUIPMENT WITH PROPORTIONAL SOLENOID VALVE WITH THREE MANUFACTURING CYCLES: MANUAL, SEMIAUTOMATIC, AUTOMATIC AND WITH BIMANUAL PUSH-BUTTON CONTROL PANEL
- LEVEL IV PROTECTION BARRIERS ON THE OPERATOR’S SIDE AND FIXED WIRE MESH PROTECTION ON THE REMAINING PRESS’S SIDES WINDING TOOL PRESSES.
